Energy Measures
90 sqm. Achieved the comfort comfort that your feet on the ground floor will remain warm, at the same time also a significant improvement of living comfort is achieved. The energy cost savings can be used to approximately 10-15%. We consider in this context the heating costs, the saved heat energy amounts to a total of 5,700 over the next 20 years can add up very quickly. For example, the insulation of pitched roof or the pointed bottom range can be performed in the aftermath of the basement ceiling.
A colossal mistake renovation of exterior thermal insulation system on the outer wall however without check, for example, the insulation of pitched of roof or the roof overhangs are not sufficient to observe, so that it can lead to premature damage within the very costly thermal insulation system. This is to avoid in any case and should professional construction supervisor only under instructions are tested and implemented. The Energy advisor questions and avoid mistakes in the planning and implementation of individual measures be sure the homeowner definitely sure that reorganisation measures do not interfere or cause additional costs. The energy consultants is to make these procedural errors do not occur. Common mistakes who as single measure renews the heating, but involves the continued use of real estate don’t worry, runs the risk that the dimensions of the new heating headquarters is excessive, if, for example, following the renewal of the heating such as renewal of heating and heating renovation takes place optimizations in the area of the thermal envelope on ceilings, walls or Windows. Such considerations are to make in each case in connection with the energy consultant and taken into account in the implementation of the rehabilitation version of the heating system. Also the renovation of Windows installations must be checked. Typically, the exchange of Windows and the insulation together should be made.
In any case, the window replacement remains but carry out the insulation of external walls. Especially in detail solutions, which may occur if for example the classic sequence with the Windows first and then the exterior insulation cannot be met, ensure that subsequent connection details already are analyzed, matched in the area of the window-installation depth or tamping of the window jambs in advance and implemented. A roller shutter is available, are also restructuring costs corresponding to the area of the roller shutter box to check and to integrate into the overall energy concept. To avoid thermal bridges and moisture damage associated with associated mold fungus can be prevented this way. The professional competence of the energy consultant helps to identify, analyze and to turn off such problems. The energy Advisor checks the House from top to bottom and shows what remedial order in which are carried out. Also, he points out the homeowners on the financial support of federal, State and local. There are for example by the KfW bank federal grants or soft loans for individual measures, which have been reactivated this year from 01.01.2012? The Sanierungswillige homeowners should these measures not miss. However, only energy-efficient remedial measures, which are tested and accompanied by an expert building energy consultant will be encouraged. The examination and the construction supervision can usually perform the energy consultants and these costs are also eligible.